STL Files for Patch Portion 25MG. See Patch Portion Tool for 25mg Nicorette Patches for all product information. Consider donating so I can purchase more brands of patches to make these tools more widely available:
Files will be available for download after checkout. Sorry I haven’t found away around that.
This work is licensed under CC BY-NC-SA 4.0
Printing Tips:
- Best printed with PETG or PLA. You will need Superglue (cyanoacrylate) or similar to glue the 3 pieces together, and some pegs or clamps to assist with gluing.
- Print the two outside pieces with the faces down so you don’t need any supports.
- There are some very small pieces in the middle of a few of the letters and numbers so a clean bed is a must, and a bed adhesion promoter might be useful.
- There are alignment holes and pins on all three parts, if the pins don’t fit you can use a 3.5mm drill bit or chamfer tool to ream the two holes, or reprint the middle piece with a 0.05-0.1mm X-Y hole compensation offset.
Reviews
There are no reviews yet.